Sound Card installation is indeed simple and rather straight forward,that is,when you know how to do it. Opening
system unit can be a scary task for some of us,especially if we have not performed this task before.The key is to be calm,take your time,and make it fun. Look forward to looking inside
computer and see just how many components you can readily identify.
PC Repair's cdrom one and
PC Test cdrom are filled with photos and video clips of these components. Remember to touch a doorknob or any grounded metal object to remove static electricity from your body.To install your new sound card,let's perform
following.
OPEN THE SYSTEM UNIT
Remove
system unit cover and locate an empty expansion bay.Note that
rear cover of
slot may have to be removed on most computers.Before touching anything,ground yourself to remove any buildup of elecrtical static charge from yourself. Touching
computer case or a boorknob will do
job.
With
cover removed from
system unit,lay
computer on its side.You may have to remove other connections or devices to have clear access to
empty card bay.
Take notes of any devices or connections that you make so that you can refer to them during installation of
new card.
New sound cards must be installed in
PCI slot. After removing
small rear cover,remove
new card from its protective wrap.This wrap is intended to keep
card away from electrical static charge.
INSTALLING THE SOUND CARD
Grasp
card and align it with
PCI slot. Slowly but firmly press
new card completely in
PCI slot.Check to be sure no part of
yellow contacts can be seen when
card is pushed in.
Secure
sound card to
system unit by using
screw that you removed when removing
rear cover.Use this screw to secure
card to
case.