Epson print heads are not removable by
user so I found a procedure that works most of
time. Epson does not support this procedure so only use it if you are ready to buy another printer or send yours in for repair.The Windex Solution For Unclogging Epson Print Heads
Tools needed:
1 - 10cc Injector 1 - 4" - 5" of fish tank air line tubing (Wal*Mart fish department) Windex (No Drip works best)
We are going to flush
print head out with
Windex cleaner. Some people from outside
US may not know about Windex. It is a popular window cleaner sold here in
US.
Cut four or five inches of fish tank air line tubing and attach it to
end of
injector, remove
needle first. Pull 3 - 5 cc of Windex into
injector. Hold
injector so that
tubing is pointing up and push
plunger a little until all
air is out of
tubing. You don't want to inject any air into
cartridge. Put this assembly aside for now.
Turn your printer on and hold down
paper feed button until
carriage moves to
cartridge change position. Unplug
printer. This is important, you don't want
carriage to move in
middle of
procedure.
Remove
cartridge that is giving you trouble. Look inside
carriage cavity for a small post that would normally be inserted into
ink port of
cartridge, in other words
post that supplies ink to
print head. You may need a flashlight to see it.