Sports: Callaway ERC Fusion Driver

Callaway ERC Fusion Driver - Long and Straight

Written by Ernie Horning

The ERC Fusion Driver is an ultra forgiving and accurate driver. This golf club is available through repparttar

"Callaway Golf Pre-Owned" website (www.callawaygolfpreowned.com).

The ERC Fusion Driver is available in lofts from 7.5 to 12.0, and is great if you are looking to drive repparttar 132970 ball "Long and Straight". The 360CC carbon composite head, with a forged titanium face, is actually 75% lighter. The ERC Fusion's 45" shaft is standard, with either a "Regular D-2" or "Strong D-3" swingweight. This enables both repparttar 132971 male and female golfer to swing repparttar 132972 club with ease, without experiencing a loss in power.

The ERC Fusion Driver looks and feels great! How many times has your foursome stood on repparttar 132973 tee box waiting to hit, and you start comparing each others drivers? You compare grips, weight, feel, take a few practice swings, trying to get an overall feel for one anothers clubs. Put repparttar 132974 ERC Fusion in your bag for your next round, and you will be repparttar 132975 envy of your foursome.

I started playing with repparttar 132976 Callaway ERC Fusion driver in repparttar 132977 spring of 2004. I had previously played repparttar 132978 Callaway C4, repparttar 132979 Biggest Big Bertha, repparttar 132980 Great Big Bertha, and repparttar 132981 Big Bertha Warbird. Although I liked my previous drivers, and hit them fairly well, none compare to repparttar 132982 success I am

5 Easy Steps To Replacing Your Golf Grips

Written by John Bolt

Replacing your golf grips is like servicing your car; you must do it on a very routine basis to keep them in top working order. We suggest changing your grips at least once a season, maybe even twice depending on where you live and how much you play.

People think that you must have your grips replaced professionally. This is incorrect because it can get costly. Actually replacing your own golf club grips is a really simple job. You will learn a lot about your clubs and save you some money.

Below we will walk you through repparttar quick simple steps to doing repparttar 132969 job yourself. But first there are a few things you will need:

1.New golf grips 2.Exacto or sharp knife 3.Double sided tape 4.Cleaning solvent 5.Work bench vice

Follow these quick easy steps:

1.Place repparttar 132970 club in repparttar 132971 work bench vice and tighten with repparttar 132972 grip being fully exposed. Take repparttar 132973 exacto or sharp knife and cut repparttar 132974 grip from repparttar 132975 shaft up to repparttar 132976 end of club, cutting away from your body. 2.Remove repparttar 132977 old grip and clean repparttar 132978 shaft of repparttar 132979 club with repparttar 132980 cleaning solvent using an old rag or brush. Then dry repparttar 132981 club off completely.

Cont'd on page 2 ==>