Soft water is water that contains very little calcium or magnesium salts. They are used to feed boilers. However, they tend to be acidic in nature.

Acidic water tends to corrode. This is not good for boiler. Corrosion can weaken boiler.

By treating boiler water with chemicals, we can control acidity of water as well as softness of water. This will solve problem with scales and corrosion, but it is not ultimate cure-all.

The boiler water will continue to become more and more concentrated as steam evaporates. The next step to take is to remove concentrated water and replenish it with fresh, soft water.

The process of removing concentrated water is called blow-down.

Folks, close your ears!

Strengthen your body resistance to combat illness or biological contaminants by working on mind. The Complete Transformation Program for Calmness, Peace, Love and Spiritual Well-being! Instant Stress Relief. Peace and Calmness Program

Boilers are able to achieve a good combustion. Oxygen content percentage of up to 5% or lower can be achieved.

Internal combustion engines have a lot of excess air because mixing of combustible mixture is a challenge for them. Furthermore, combustion is meant to provide power to drive pistons.

The burning of sulphur in fuel is a problem for combustion equipment. This is because byproducts of combustion will create sulphur dioxide and sulphur trioxide. These will react with water, also a byproduct of combustion of Hydrogen to form sulphuric acid and sulphurous acid.

SO3 + H2O = H2SO4 SO2 + H2O = H2SO3 2H2SO3 + O2 = H2SO4

However, effects of corrosion, called low temperature corrosion can be avoided by keeping temperature above dewpoint. That means to keep exhaust temperature high so that water droplets will not form on exhaust ducts.

Folks, get hot! Too much heat can cause wrinkles!

"Uncover Remarkable Secrets of Youth!" Breakthrough Magic Formula creme removes wrinkles. Amazing results achieved through Superior European Miracle Designs. Remove Aging Wrinkles