Home Repair: The Awnings can be made with transparent plastics

The Awnings can be made with transparent plastics

Written by Carlos Mello

Continued from page 1

Vertical welds (recommended):

There will be a weld on average each 1.35 meters and whole strips are used.

In repparttar center or in repparttar 140550 extremities there will be a smaller strip in agreement with repparttar 140551 use of repparttar 140552 material. In repparttar 140553 lateral ones, there will be reinforcement in Crystal (equal repparttar 140554 amendment) of 2.5 centimeters.

In repparttar 140555 sense of repparttar 140556 vertical welds repparttar 140557 shrink doesn't exist, however, when opening repparttar 140558 awning crystal they will appear waves, which will disappear in few minutess.

Comparing with repparttar 140559 horizontal weld, that vertical method " glues " less when coiled.

About repparttar 140560 Author:

Carlos Mello is repparttar 140561 Director of Arquitetoldos, an awnings manufacturing company. See repparttar 140562 sites http://www.amx.com.br/toldos and http://toldos-toldo-coberturas-aluguel-dias-rio-de-janeiro-recreio.us .

--------------------------------------------------------------------------------

Guidelines: You may publish my article in your newsletter, on your website or in your print publication provided you include the resource box at the end. Notification would be appreciated but is not required.

Lighting for Seniors

Written by Paul Forte

Continued from page 1
Another point to consider is outdoor lighting for security. Be sure to provide plenty of light at all entrances and exits. These lights should also be on a timer or photocell so that they are on when needed. Someone may leave expecting to be home before dark and get delayed. In this case having repparttar

lights come on automatically will allow them to enter repparttar 140549

house safely. Motion detectors can also be used in places that we don’t want to keep repparttar 140550

lights on for extended periods. Areas like walkways along repparttar 140551

side of a house or a path where repparttar 140552

garbage is taken out. Driveways are another good location for a motion detector light. In fixtures where changing a bulb is a little difficult, using a compact fluorescent is a good choice. With a compact fluorescent, repparttar 140553

bulb will last as long as 3 years and sometimes longer. A great place for one is in a shower light, just be sure to get a big enough bulb to light repparttar 140554

area adequately. Outside light fixtures are also a good choice unless you live in an area where repparttar 140555

temperature gets below freezing a lot. Another place for fluorescent fixtures are closets, which can be extremely dark for an elderly person. The key points to remember are to make sure all areas are adequately illuminated and use fixtures that require a minimum of maintenance.

Paul forte has been in the lighting industry for over 25 years. For more info and tips on lighting and other electrical needs please visit Lighting Tips For help with Laying out recessed lighting

<Back to Page 1