Building a Wood Ladder

Written by Dave Markel

Continued from page 1

Before removingrepparttar clamps use your hammer to break outrepparttar 116095 wood inrepparttar 116096 notches and clean up each notch with your chisel.

Unclamprepparttar 116097 two uprights and set them aside. Now cut allrepparttar 116098 2x3's into 19" lengths. You will get 5 out of each 2x3 but since we will only need 9 rungs you will have 1 extra. Each rung is attached torepparttar 116099 upright with exterior wood glue and deck screws. You will need to drill two countersinks on each end ofrepparttar 116100 rung (so 4 per rung).

Now attach them torepparttar 116101 uprights starting withrepparttar 116102 top and bottom rung. You might need to use your hammer to "convince"repparttar 116103 rungs intorepparttar 116104 notch. Don't force them intorepparttar 116105 notch if it too tight. They should only need to be tapped in not beat to pieces.

Put some ofrepparttar 116106 exterior wood glue into both notches and insert a rung. Make surerepparttar 116107 rung in flush torepparttar 116108 outside ofrepparttar 116109 uprights. Secure in place with 4 deck screws (2 on each end). Continue this forrepparttar 116110 reminder ofrepparttar 116111 rungs.

Protect you ladder with a durable finish like paint or stain.

Visit Sage Brush Wood Working for more great articles about wood working.

Best Site Poker has to Offer!

Written by Ryan Whiteside

Continued from page 1

Also, everytime you play you receive "Player Points" which you can use to get in special tournaments! And speaking of tournaments...

If you like freerolls then they have plenty of those too!

So there really is no reason not to try InterPoker right now. Downloadrepparttar free software below and find out what you have been missing!

Earn $100 a month at InterPoker today through this special link!

I have had great success with the additional $100 I make at InterPoker. It truly is a wonderful deal.

    <Back to Page 1 © 2005
Terms of Use